This guide was updated on 2/8/17 Background There are a few ways to get audio from the Pi Zero. The easiest

This guide was updated on 2/7/17  To purchase a 4.3″ LCD with the following process already completed, visit the store.

This tutorial describes one method of adding joystick function to your Raspberry Pi projects. This is the simplest method to set

To purchase a completed board or to get a BOM so you can make your own, visit the store page

This post explains the basics of using a lithium battery on a Raspberry Pi project. List of Materials Needed: Lithium

This tutorial will be based around the 4.3” composite LCD used in my PSPi, but applies to any composite LCD.

The Pi Zero has a microUSB connector onboard, but sometimes the position of the connector doesn’t work for a project

The Raspberry Pi Zero has pads on the underside that connect directly to the microSD card pins, and this allows

This is a build tutorial for a simple soft power on/off circuit for the Raspberry Pi. For the improved version