That being said, anyone have one completed for sale let me know :p
Ok, I reimaged and loaded multiple times. Still the same. DuckTales NES is the only thing that would play. SNES games would black screen, and GBA (Aft...
Ok so NES did load Duck Tales and Mega Man. The load screens and music p limited but it was corrupt. Anyone have anythoughts?
Bingo! That did it. I got it to boot up and turn on. Going to take apart the SD tomorrow and see where i messed up. Thanks!
I do get the orange charge light while the charger is plugged in
congrats man!
got another screen. Doesn't appear to be plug and play. Which converter gets pulled?
Cool. let me know how it comes out. If all else fails I saw Fry's has 4.3" LCD back up cams so could grab one of those and give it shot.
Tried to clean it. No luck. Going to grab some wick from Frys tonight and give it abother shot.
Calling it a night. No go on this screen. I wired a hot wire to Pin 2 and then tried 3. At 2 I get 0 going past that. On pin 3 I read 5v out to the fp...
I think I know why the power module is not working. Looks.like like a short like you said. I went ahead and ordered the new one. The hair dryer worked...
"component with the 0" the 220 vt one?
No worries, I still got a few hrs at work. Went ahead and ordered the new power module, I think I might have messed it up popping off the clips. I am ...
I'll give it a shot tonight. So to be clear. I pop out the JW5022 buck converter and run a 5v+ into Pin 2 (VIN 2 -- the one immediately under the litt...
Got ya. When I get home I am thinking to do a tear down and then rebuild. Pretty sure I can clean it up alot now that I have an idea what to expect.
I don't have the batteries wired in yet. Just wanted to make sure that's called out. Ok I do get a red light on the module. I wired up the power butto...
Alos forgive the noob questionsSo I popped out the multimeter to see whats going on. I have 5.07 coming off the charger and going into the power modul...
SO put some time on this. No luck though. Screen wouldn't kick on and or pi power up. Did some tests and looks like no power was leaving the LED so I ...
Ok new fpc came in. Love the new design. Made it so much easier. Also grabbed some solder and new tips for my iron. Tinned the tip and went to work. W...
While I did mess up the fodder 24 and need to wait for another, I plugged the pi in to test the sd.. it works!
**tip** Get familair with tinning the soldering tip. Being one that is not familiar with soldering, I just jumped into this but am learning how much e...
SD done. When we get home tonight I'll plug in the pi and test the SD reader.
Oops - Rookie!
Batteries
Ok. So made a boo-boo on the fpc24. Drop some soldering in it and couldn't clean it out. 😣. I ordered another and did some small stuff in the mean tim...
Was wiring everything up and realized that I didn't have a power switch. What are people using? What was used in the video? (Store or Amazon link?)
You may beat me to it. PAX South is this weekend so will be attending that.
Awesome. I'll wire it up as is and see. Thanks again.
Here's the other
Sure. So the one closest to the power says "MR 25Q40ANG 1623" the other says "Jw5022 6P365CF"
The screen came in. Little confused which is the buck that need removed. Neither have 1509 on them..
Sweet!! I keep checking the mail everyday for it! Side note is there any update on video part 2? Even if unedited, it helped a lot.
This will help a ton! I got the AMP wired up as well as the FPCs. My rookie soldering skills did cause a problem on the SD card. The plastic melted a ...
Awesome. I reached out to the company, they said 15 to 35 days. Hopefully closer to 15 ;). Today I got the right side and left side controls wired up...
Called it a night. Tomorrow going to borrow a friendsmall multimeter to make sure power is up correctly. Then I'll do the SD. I checked the dpad fit a...
Ok a bit impatient in the lcd. No shipping number so checking everyday. Anyways, I got the ports off the power board and started putting together. I u...
Still have about a week before the lid and kit come in but wanted to make some progress. Went ahead and did the PSP tear down. Looks like someone else...
Yes, 8 Gig Card and adapter. Will swap it for a 32. What is it using for software? Can I pull retropie ?