thank you,i got it going,bypassing the diode worked,the controller board draws more power then i like,but ill find a work around.

i still cant seem to get my screen working at 5v

has anyone seen this control board and gotten it to work at 5v?

For sell now on eBay

Here's a video with the working hdmi,I will link my eBay auction as soon as it up

Thank you Othermod for all the work you have done on here,you have inspired me to build some other projects,I will be ordering some more from you in t...

If you wire the grounds from the speaker to the outer one the headphone jack then the ground from the jack to ground it will let u make the speakers w...

Good deal,i put some pics of mine up,i added wireless charging a full usb port a hdmi port and used the home and volume buttons for the screen adjustm...

The ampmeter that I have is only for ac, once you get it in let me know if it has the same controller board,the lcd is half the thickness as the oem o...

I'm working on adding hdmi to my PSPi. I'm moving the usb over to were the door open switch is and going to try and add a full hdmi to the top center ...

this works great at 5v, just put 5v strait into the 12v input, it also has contrast ,brightness,and resolution adjustments,plus has a second input of ...

Here is the eBay link of the lcd with that board if your interested

At 12v input the top 2 pads get 3v and the leg gets 12v. At 5v input the top 2 pads get 3v and the leg gets 5v.

I'm trying to get this controller board to run at 5v and it is giving me 3.3v at the point that I bleave need to be,before I put 5v to it and fry it c...

On both of these board there is a solder bridge on the pins,let me know if this is correct