Hello,
I am hoping to build one of your PSPi 1000 version 2, since I have no experience soldering PCBs, otherwise I would make version 4. However I have made many electronic projects and have also spent many hours configuring retro pi in many different ways. I can read schematics and solder boards just fine, but I have never assembled a PCB and try to avoid doing so. I have some questions, though, before I start.
First I was wondering if this tutorial would allow me to add a joystick as if it were a few more buttons. http://othermod.com/analog-joystick-on-retropie/ Or if this one would do the same thing. http://othermod.com/simple-joystick-using-lm339/
Second I was wondering if I could and if so, how to add this circuit to version 2 or if it was already added.
http://othermod.com/raspberry-pi-low-battery-warning-led-circuit/
Thirdly I noticed the only board that you still carry for version 4 is the headphone board. I was wondering if this could be used in creating version 2 since it seems to put a bunch of the same components on one board. I would not ask other than the fact that the pin out is not marked thus I can not tell. If it will work would you be so kind as to give me what each color is, too.
Thank you for any help you can provide
It seems as if this site is dead. I was hoping to order a board smdh
It seems as if this site is dead. I was hoping to order a board smdh
I think it is dead i have had no responses so far.
Yes, I certainly neglected the site. I'm back, if you still want any of those questions answered @gabe
