That light blinks twice, flutters for a second and then stays solid. that whole process is maybe 2 seconds long.
I'm getting 3.26v between the orange spot
I scraped it away and got it to connect, now have 5v going to the controller board. I still don't have an image.
Also when I did push down to the board past the LCD+ connection it was reading a nice 5v.
I powered it on and checked the voltage between the LCD+ and LCD -. I was still getting the .5-1v from those two connections until i started to push d...
If you are referring to the red/black points that you highlighted in the picture, no. Im only getting 1-.5v
I have it hooked up correctly, turned it on and measured the volts between those two connections you said. I got weird readings, started at 1.0v and s...
Unfortunately I can't remember what was switched cuz i got so excited that it was the problem and switched it back to find out it still wouldn't work....