Notifications
Clear all
Topic starter
February 19, 2017 8:55 pm
I need some help with the 24 Pin FPC connector, Mine is different from the PSPI version 2.1 video tutorial, is there a picture that you could send so i can see how you would solder the one i have? there should be a picture attached to this post.
February 20, 2017 1:36 am
The pins are the same as the one in the video, everything connects the same. The only difference on this is that the board size was increased a little so I could make the solder points larger. The pads coming off the pin holes are just to make soldering easier.
March 12, 2017 3:25 am
On both of these board there is a solder bridge on the pins,let me know if this is correct
March 12, 2017 6:53 pm
It's correct. Both boards have 3 GND connections next to each other.
For example:
