Don't know why I didn't think of using a battery overvoltage IC. The other part of the problem would be that it would bypass the shutdown circuit too...

I think I found a compromise. To give you a visual here is v0.2 of the board. The Rpi Zero will be moved up and the case will cover up the Rpi's port...

Yea, we have a software guy that makes this easy on the rest of us. He is actually one of the main contributors to lakka and one of the top contributo...

Have you looked into using DPI on the RPi? All 40pin RPi's are capable of directly running LCD screens up to RGB666 (18-bit). On the project I am help...

I added a dedicated usb for charging the battery and powering the system. But the Rpi's USB ports will be exposed in the case and is used for a wifi a...

I am connecting the battery directly to the 5v pin of the RPi Zero. The 5V line of the RPi is tied to the USB ports that are on the RPi. So in the eve...

The issue is that I am running the RPi directly from the battery. The voltage drop over a diode will be too much and cause the RPi to go unstable befo...

I am planning to use this to control a battery supply to the RPi. I added a dedicated charging USB port but in the event that a USB port on the Rpi is...