Notifications
Clear all
Topic starter
December 19, 2023 12:33 am
i just downloaded to retro pi image to my pi zero 2 W and after it booted up im left with a screen that seems to be looking for me to type something in in the beginning does anyone have an idea what i sould type?
December 29, 2023 6:00 pm
If you set a custom username or password in Raspberry Pi Imager, then it tends to break RetroPie
January 8, 2024 8:17 am
@othermod Actually i have the same problem, solution is to comment #dtoverlay=vc4-kms-v3d in /boot/config.txt and reboot. I don't know what will affect this but is work for me. You can use "sudo nano /boot/config.txt" to edit config.txt or just edit using PC.
January 26, 2024 2:41 pm
@mad That's interesting. What caused you to try that? I want to research why it fixed your issue.
January 26, 2024 6:25 pm
@othermod version of hw is firs one(no extra fixes at all), i use zero pi 2w, newest version of retropi + last version of your installation(atmega and install folder). Somewhere i found that solution.
