PSPi 1000 Version 2.1 Kit


Version 2.1 is permanently out of stock. All my time is focused on the release of Version 4 for now, but a replacement for Version 2.1 is planned for the future.

Description:  This kit is at the center of the PSPi 1000 Version 2.1 build. It includes small modules instead of individual components. The soldering process is much faster and simpler than the original PSPi 1000 Version 2 build.

You Need the Following to Complete the Build:
Broken PSP 1000 Series
Raspberry Pi Zero
microSD card and SD to microSD Adapter
Composite LCD

Share this with others

Out of stock



FPC24 Interface Board
FPC10 Interface Board
Power On/Off Board
Low Battery Warning Board
Lithium Charge Module
2 Batteries
USB A/B Adapter
Audio Amplifier Board with Filter Included
miniUSB Connector
USB Charging Cable
8 Colors of 30AWG Wire – 2 Feet of Each Color
3 Colors of 26 AWG Wire – 2 Feet of Each Color
Mini Switch (the same as the original PSP Wifi switch) for switching the audio on and off (optional feature)
Simple Joystick Board

Recent Improvements:

The simple joystick board is now included. Any order placed after 2/13 will receive this as well.

The audio amplifier with built-in filter is now part of this build. The audio filter doesn’t have to be soldered separately now. The new amplifier also has a connection for shutdown, which adds the optional feature if wanted.

The charge module with pre-removed connectors is now a part of the build. I’m doing a little more work on my end should make the process a lot easier for you guys.

I’m also including a small switch so you can turn the audio off and on easily.


Share this with others

Additional information

Weight .25 lbs
Dimensions 3 x 3 x .8 in