psp project - Show off Your Projects https://othermod.com/forum/main-forum/psp-project/ othermod Discussion Board en-US Tue, 21 Jul 2026 12:52:53 +0000 wpForo 60 RE: psp project https://othermod.com/forum/main-forum/psp-project/#post-332 Mon, 27 Mar 2017 14:14:48 +0000 Excellent. The first place to check would be where the Pi connects to my board, since you're soldering blind. Take the SD card out of the Pi and use an ohmmeter between the pins on the Pi's microSD slot and the 9 pin holes on my board. The Pi only has 8 pins because microSD only has one GND, and the regular SD has 2 GNDs

http://elasticsheep.com/wp-content/uploads/2010/01/sd-card-pinout.png

Here's an image to show what I'm talking about

1625

I made that off of memory. I have to double check that I drew the lines between the pins correctly when I get home later today. It should give you an idea of what I'm saying though.

]]> Show off Your Projects othermod https://othermod.com/forum/main-forum/psp-project/#post-332 RE: psp project https://othermod.com/forum/main-forum/psp-project/#post-331 Mon, 27 Mar 2017 03:21:27 +0000 Bingo! That did it. I got it to boot up and turn on. Going to take apart the SD tomorrow and see where i messed up. Thanks!

]]> Show off Your Projects rutledge.allen.l https://othermod.com/forum/main-forum/psp-project/#post-331 RE: psp project https://othermod.com/forum/main-forum/psp-project/#post-330 Mon, 27 Mar 2017 02:28:39 +0000 If you don't have an OS loaded on the SD card, then it will do that. If you have an OS on the SD card and it's attached to the Pi using a microSD adapter, try plugging it directly into the Pi.

]]> Show off Your Projects othermod https://othermod.com/forum/main-forum/psp-project/#post-330 RE: psp project https://othermod.com/forum/main-forum/psp-project/#post-329 Mon, 27 Mar 2017 02:26:14 +0000 I do get the orange charge light while the charger is plugged in

]]> Show off Your Projects rutledge.allen.l https://othermod.com/forum/main-forum/psp-project/#post-329 psp project https://othermod.com/forum/main-forum/psp-project/#post-328 Mon, 27 Mar 2017 02:23:51 +0000 My v3 board came in so I jumped back on the project. SO much easier. Anywho followed the guide and after putting it all together I go to turn it on and get the green power light for a few seconds then powers off. I tried with the charger plugged in and had the same result. I checked the batteries and they have 3.8 on them. Thoughts?

]]> Show off Your Projects rutledge.allen.l https://othermod.com/forum/main-forum/psp-project/#post-328