|
@whitebeard No worries, I moved it to a more appropriate sec... In forum Project Ideas and Feature Requests |
6 months ago |
|
I don't understand exactly what you're asking. Are you tryin... In forum Support for othermod's Boards |
6 months ago |
|
@ron-plank The Display button adjusts the brightness.
Can ... In forum Support for othermod's Boards |
6 months ago |
|
@ron-plank Its possible you shorted something if you were in... In forum Support for othermod's Boards |
6 months ago |
|
It is possible, but I haven't really made it a focus because... In forum Project Ideas and Feature Requests |
7 months ago |
|
Hey, just a follow-up. The automod banned you for some reaso... In forum Support for othermod's Boards |
7 months ago |
|
I think the changes you need are in retroarch.cfg. I don't u... In forum Support for othermod's Boards |
8 months ago |
|
@ummm Do you have a cheap way to send the whole thing to me?... In forum Support for othermod's Boards |
9 months ago |
|
@ummm The solder work looks excellent, so I doubt you have a... In forum Support for othermod's Boards |
10 months ago |
|
@ummm also, I'm doing a little forum housekeeping and I move... In forum Support for othermod's Boards |
10 months ago |
|
@ummm The solder joints between the header and the Pi Zero, ... In forum Support for othermod's Boards |
10 months ago |
|
@ummm This is making me wonder whether you have something sh... In forum Support for othermod's Boards |
10 months ago |
|
@ummm Alrighty here are the first two things to check.
The... In forum Support for othermod's Boards |
10 months ago |
|
@ummm Alright I'll put some images together showing the area... In forum Support for othermod's Boards |
10 months ago |
|
@ummm Yes. Unplug and replug at both the PSPi and the small ... In forum Support for othermod's Boards |
11 months ago |
|
@ummm I rarely see it go bad, unless it was removed and rein... In forum Support for othermod's Boards |
11 months ago |
|
@ummm ok it's probably that FPC cable then In forum Support for othermod's Boards |
11 months ago |
|
Gotcha. I test each of these with a Raspberry Pi before ship... In forum Support for othermod's Boards |
11 months ago |
|
Do you get any lights at all when you try powering it on? In forum Support for othermod's Boards |
11 months ago |
|
Yes, I certainly neglected the site. I'm back, if you still ... In forum Support for othermod's Boards |
1 year ago |
|
Hey,
I'm prototyping a new LCD topper design (same shape, ... In forum Support for External Projects |
1 year ago |
|
There won't be a 2000 or 3000 version. Too many issues with ... In forum Support for othermod's Boards |
3 years ago |
|
@p7 are you still needing support? @tpruegner That's a stran... In forum Support for othermod's Boards |
3 years ago |
|
I never tried adapting the Duo connector to MicroSD and inte... In forum Support for External Projects |
3 years ago |
|
Yes, very busy. I'm working through support on the final mas... In forum Project Ideas and Feature Requests |
3 years ago |
|
1. Is there anywhere where I can either purchase or get the ... In forum Project Ideas and Feature Requests |
3 years ago |
|
@nexilla Do you have a 12v power supply to use for testing, ... In forum Support for External Projects |
3 years ago |
|
Possible? Absolutely. I lean in the direction of the Pi 3 A+... In forum Project Ideas and Feature Requests |
3 years ago |
|
Hey, I'm working through all these posts that came in while... In forum Support for External Projects |
3 years ago |
|
It's always the solder joints. I'm glad you got it working. In forum Support for othermod's Boards |
4 years ago |
|
The product page lists everything included and needed. After... In forum Support for External Projects |
4 years ago |
|
When you tested with the 2A power source, was that after sol... In forum Support for External Projects |
4 years ago |
|
I recommend checking the FPC cable that runs to the Pi's CSI... In forum Support for External Projects |
4 years ago |
|
Ok so you disassembled it also? If so, then check the FPC ca... In forum Support for othermod's Boards |
4 years ago |
|
That all seems like it could be software issues. Have you tr... In forum Support for othermod's Boards |
4 years ago |
|
Thanks for posting this In forum Support for othermod's Boards |
4 years ago |
|
It has been resolved. I found the batch of cables that came ... In forum Support for External Projects |
4 years ago |
|
It's possible that the voltage is still lower than what's ne... In forum Support for External Projects |
4 years ago |
|
I'll have a batch of them ready next week In forum Support for External Projects |
4 years ago |
|
The wire order should match the order on the board In forum Support for External Projects |
4 years ago |
|
To fix, I recommend just soldering the green wire to the blu... In forum Support for External Projects |
4 years ago |
|
That's exactly the problem. I just went through my box of 8-... In forum Support for External Projects |
4 years ago |
|
Awesome. Thanks for posting the response. I was googling it ... In forum Support for othermod's Boards |
4 years ago |
|
I saw the response, but my shop orders get priority over fre... In forum Support for External Projects |
4 years ago |
|
That's a new one. The IC (looks like it says G8BAB) appears ... In forum Support for External Projects |
4 years ago |
|
That LCD has an entirely different pinout, so it won't work ... In forum Support for External Projects |
4 years ago |
|
Yep, 18 and 19. You'll have to tweak the overlay. I'm pretty... In forum Support for External Projects |
4 years ago |
|
The next batch of headphone boards will arrive in a few days... In forum Support for External Projects |
4 years ago |
|
Unfortunately DPI steals one of the I2S necessary pins, so y... In forum Support for External Projects |
4 years ago |
|
Those look great. Thanks for posting. In forum Show off Your Projects |
4 years ago |
|
Nope. Same deal as the microSD. Everything is just routed st... In forum Support for External Projects |
4 years ago |
|
All three microSD slots share the same signal. There is some... In forum Support for External Projects |
4 years ago |
|
The headphone board has no effect on performance of the Pi. ... In forum Support for External Projects |
4 years ago |
|
If you leave GP2 disconnected, then the circuit will power o... In forum Support for External Projects |
4 years ago |
|
If you're asking about the PSPi headphone board, instruction... In forum Support for External Projects |
4 years ago |
|
It depends on the image. If it's based off a recent version ... In forum Support for External Projects |
4 years ago |
|
Almost all of them work with it, so it's really just going t... In forum Support for othermod's Boards |
4 years ago |
|
Just copy this and you're good. In forum Support for External Projects |
4 years ago |
|
Also, if you exit to the command line and type jstest /dev/i... In forum Support for External Projects |
4 years ago |
|
You already ruled out the most likely cause by putting the m... In forum Support for othermod's Boards |
4 years ago |
|
That's exactly it. The wires in the rubber piece make the co... In forum Support for External Projects |
4 years ago |
|
It's probably something very minor causing the issue. It jus... In forum Show off Your Projects |
4 years ago |
|
Sounds like a corrupt or poorly-connected SD card. Try remov... In forum Show off Your Projects |
4 years ago |
|
You're blowing up my forum a bit, so I'm combining all your ... In forum Support for External Projects |
4 years ago |
|
The kits are backordered by about a month. I'm shipping kits... In forum Support for External Projects |
4 years ago |
|
It is functional. The joystick connects to the board the sam... In forum Support for External Projects |
4 years ago |
|
It's 50/50 on whether you'll ahve to do more, just depends o... In forum Support for External Projects |
4 years ago |
|
Looks like you have the XL1509 buck converter. It drops volt... In forum Support for External Projects |
4 years ago |
|
It appears to be a 3.3v buck converter, and the large voltag... In forum Support for External Projects |
4 years ago |
|
They are electrically compatible, but there's no way they wi... In forum Support for External Projects |
4 years ago |
|
It's actually better that it doesn't work. That way you're n... In forum Support for othermod's Boards |
4 years ago |
|
Yeah power and USB adapters In forum Support for othermod's Boards |
4 years ago |
|
snap a picture of the bottom and I'll see what I can do to h... In forum Support for External Projects |
4 years ago |
|
The kit includes the board, LCD, and speaker wire. It doesn'... In forum Support for othermod's Boards |
4 years ago |
|
It will not work with a 3000 series. 1000 series only. In forum Support for External Projects |
5 years ago |
|
I wouldn't say near future. V4 orders are coming in faster t... In forum Project Ideas and Feature Requests |
5 years ago |
|
1. Is the turnigy battery the max physical size for the psp ... In forum Support for othermod's Boards |
5 years ago |
|
Correct. The 300k pulldown can't overcome the 40k pullup fro... In forum Support for External Projects |
5 years ago |
|
The OS is watching the pin attached to GP1, so pressing the ... In forum Support for External Projects |
5 years ago |
|
I haven't looked into the Vita at all since last year. Might... In forum Support for othermod's Boards |
5 years ago |
|
Do you have another Pi Zero that you can test the SD card in... In forum Support for External Projects |
5 years ago |
|
It sounds like an issue with the Raspberry Pi. Are you confi... In forum Support for External Projects |
5 years ago |
|
The small boards for controls, ribbon cables, LCD bracket, a... In forum Support for othermod's Boards |
5 years ago |
|
Sounds like you might have the joystick wired up incorrectly... In forum Support for External Projects |
5 years ago |
|
Hmm..that's a weird one. Were you able to complete the butto... In forum Support for External Projects |
5 years ago |
|
Yes, it is designed to work down to about 2.5v. In forum Support for External Projects |
5 years ago |
|
Same orientation. That's the right side of the GPIO header, ... In forum Support for othermod's Boards |
5 years ago |
|
Nope, not that one. This is the connector rotated 180 degree... In forum Support for othermod's Boards |
5 years ago |
|
Exactly. My board. In forum Support for othermod's Boards |
5 years ago |
|
The left arrow and top-right arrow are always connected toge... In forum Support for othermod's Boards |
5 years ago |
|
I'm happy to take a look at it. It does sound like a defecti... In forum Support for othermod's Boards |
5 years ago |
|
The other USB port doesn't have data pins, so it won't help ... In forum Support for othermod's Boards |
5 years ago |
|
It's possible. Did you copy over all the files, including th... In forum Support for External Projects |
5 years ago |
|
I'd like to get more info about what exactly the board was d... In forum Support for External Projects |
5 years ago |
|
Issues with the on/off board, or with the RPi? In forum Support for External Projects |
5 years ago |
|
Those numbers are exactly what I'd expect. It should be work... In forum Support for External Projects |
5 years ago |
|
3,3v is what you want, so it's at least working partially. T... In forum Support for External Projects |
5 years ago |
|
Can you verify that your putting at least 5v into the LCD po... In forum Support for External Projects |
5 years ago |
|
You should have contact between all the yellow areas, and y... In forum Support for othermod's Boards |
5 years ago |
|
Do you have an ohmmeter? There are a couple things we can ch... In forum Support for othermod's Boards |
5 years ago |
