Forum

Button configuration  

  RSS

Moritz Grabmann
(@grabmann-moritz)
Active Member Customer
Joined:8 months  ago
Posts: 5
May 27, 2017 7:43 pm  

Hey guys,

i just finished building my PSPi 1000 v3 and was about to configure the buttons but i've got some issues:

first of all the left analog stick and the left controls seem to be recogniced as one and the same input. E.g i configured the left "arrow" and then the left analog stick but it says "already taken" (same goes for the other 3).

And the last problem is that the "down arrow" and "down joystick" don't work when configuring the controls, But in the console they work perfectly fine.

Of course i used your Scripts and executed them.

Best regards Moritz


ReplyQuote
Moritz Grabmann
(@grabmann-moritz)
Active Member Customer
Joined:8 months  ago
Posts: 5
May 27, 2017 7:52 pm  

ok the buttons dont even work in the console etc. anymore. So it might be broken or the solder needs some work.


ReplyQuote
othermod
(@othermod)
Reputable Member Admin
Joined:1 year  ago
Posts: 273
May 27, 2017 8:02 pm  

In v3 the joystick controls are tied to the same GPIO pins as the d-pad. If both the joystick and d-pad doesn't work it's either a bridged/unconnected solder connection at the GPIO pin or the wires to the joystick are swapped/bridged/unconnected.


ReplyQuote
Moritz Grabmann
(@grabmann-moritz)
Active Member Customer
Joined:8 months  ago
Posts: 5
May 28, 2017 2:04 pm  

Tanks a lot. Now its Wirkung

I habe One last siehe: when i play games theres always a black border. What are the optimal settings for the tft Display?


ReplyQuote
Moritz Grabmann
(@grabmann-moritz)
Active Member Customer
Joined:8 months  ago
Posts: 5
May 28, 2017 4:30 pm  
Posted by: Moritz Grabmann

Tanks a lot. Now it working.

I have one last issue: when i play games theres always a black border. What are the optimal settings for the tft Display?

Gold i hate the german autocorrection.


ReplyQuote
  
Working

Please Login or Register