Forum

'Triangle' button not working  

  RSS

John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 18, 2017 11:24 pm  

 Here is the picture of the control/power board. All three arrows are connected together.

PSP Triangle


ReplyQuote
John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 18, 2017 11:30 pm  

After checking with my meter, it is pin 4 on the zif connector on the controller board. 

Edited: 4 months  ago

ReplyQuote
othermod
(@othermod)
Reputable Member Admin
Joined:1 year  ago
Posts: 273
September 18, 2017 11:31 pm  

The left arrow and top-right arrow are always connected together, but the middle one shouldn't be. Any chance you can get a pic of the pins on the FPC connector?


ReplyQuote
John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 18, 2017 11:32 pm  

On your board correct?

 


ReplyQuote
othermod
(@othermod)
Reputable Member Admin
Joined:1 year  ago
Posts: 273
September 18, 2017 11:33 pm  

Exactly. My board.


ReplyQuote
John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 18, 2017 11:42 pm  

Here it is:

fpc


ReplyQuote
John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 18, 2017 11:44 pm  

It would be this pin correct?:

fpc1


ReplyQuote
othermod
(@othermod)
Reputable Member Admin
Joined:1 year  ago
Posts: 273
September 18, 2017 11:50 pm  

Untitled

Nope, not that one. This is the connector rotated 180 degrees from the position in your pic


ReplyQuote
John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 19, 2017 12:11 am  

Ok, and opps, forgot to add two lines for the right shoulder. So it would be the sixth trace from the left in my picture. I will dig deeper tomorrow and see where that trace connects to and see if it is shorted against something. Can you tell me where the triangle line goes to on your board? So that I can check.

 

Edited: 4 months  ago

ReplyQuote
othermod
(@othermod)
Reputable Member Admin
Joined:1 year  ago
Posts: 273
September 19, 2017 12:22 am  

Untitled

Same orientation. That's the right side of the GPIO header, closest to the battery compartment.


ReplyQuote
John Pilkinton
(@2008cbr1krr)
Active Member Customer
Joined:7 months  ago
Posts: 7
September 19, 2017 12:29 am  

Gotcha! Thank you so much for your help. I will look into this tomorrow. 


ReplyQuote
  
Working

Please Login or Register